PRODUCTS
MODEL L Pressure Reducing Valve
+
  • MODEL L Pressure Reducing Valve

MODEL L Pressure Reducing Valve

Category:

Pressure Regulators

Product Inquiry
Related products
  • Product Description

  • 　　Explanation

    　　Model L is a two-stage regulator/vaporizer. These units are heated by engine‑circulating water and, in industrial applications, deliver a fuel vapor flow with peak ratings of 325 hp (242 kW) or 200 hp (150 kW). The Model L regulator provides an outlet negative pressure of −1.5 in. w.c. (−0.37 kPa), with no optional pressure settings. It features cost‑effectiveness, a rear‑mounted fuel inlet, and primary and secondary pressure diagnostic test ports. An optional silicone diaphragm is also available.

    　　Specifications

    　　Fuel Type..........................................LPG Liquid/Gas

    　　Inlet pressure

    　　Maximum value...............................312 psi (21.51 Bar)

    　　Minimum value................................30 psi (207 kPa)

    　　Outlet pressure (rated).................-1.5” w.c. (0.37 kPa)

    　　HP/kW ...... Peak output is 325 hp (242 kW), with a continuous rating of 200 hp (150 kW)

    　　Operating temperature range.........-40°F to +250°F (-40°C to +121°C)

    　　Fuel filtration requirement....................................40 microns

    　　Heat source..................must be liquefied petroleum gas liquid;

    　　Installation Position..............................Vertical installation (with the outlet facing downward) is recommended; however, if emissions from LPG fuel as specified by HD-5 can be adequately controlled, horizontal installation is also acceptable.

    　　Applications: transportation, industry, and automotive;

    　　Certification..........................UL (AU1502) ECE for special certification.

Product Inquiry

Please provide the following valid information, and we will contact you as soon as possible.

Submit